State Atlas

Aluminum Wiring: The 1965 to 1973 Homes, State by State

A state atlas of the homes built in the aluminum branch wiring years, set beside CPSC's findings, its accepted repairs and what insurers and sale forms ask.
Primary data
Census ACS 2025 1-year B25034 with Census New Residential Construction starts by region
Data period
Homes standing in 2025, built 1965 to 1973
Latest release used
2026-10-29
Next release
ACS 2026 1-year, expected autumn 2027
Geography
United States, 50 states and DC
Sources
26 (24 Tier 1)
Short answer

An estimated 15.8 million US homes standing in 2025 were built from 1965 to 1973, the window when builders used aluminum wiring in branch circuits after a copper shortage. CPSC reports pre-1972 aluminum-wired homes were 55 times more likely to have outlet connections reach fire hazard conditions, and accepts only copper rewiring, COPALUM or AlumiConn as permanent repairs.

15.8 millionEstimated US homes built 1965 to 1973 still standing in 2025, 10.7% of housing units (KBR estimate)[1][5]
55 timesPre-1972 aluminum-wired homes vs copper-wired homes, likelihood of outlet connections reaching Fire Hazard Conditions (CPSC, Franklin Research Institute survey)[7]
14.6%Hawaii's share of housing built 1965 to 1973, highest of any state, 2025 (KBR estimate)[1][5]
4 of 9Maine insurer homeowners guideline files that name aluminum wiring, 2018 to 2023 editions[13][14][15][16]

Aluminum wiring entered homes on a copper shortage and lost favor with a 1972 alloy change

Federal and industry records place aluminum branch wiring in a short window. CPSC says homes built before 1965 are unlikely to have it, and USGS price data show copper climbing 79.5% from 1964 to 1970 while aluminum barely moved.

The U.S. Consumer Product Safety Commission (Publication 516, June 2011) says a copper shortage in the mid 1960s pushed builders to run aluminum wire on general purpose 15 and 20 amp circuits, not only on the large dryer and range circuits where it was already common. CPSC adds that homes built before 1965 are unlikely to have aluminum branch circuit wiring, and that cables installed from 1965 to the mid 1970s, in new homes, additions and rewired circuits, may contain it.

USGS historical statistics show the price gap that made the switch attractive. The US copper unit value rose from $713 a metric ton in 1964 to $1,280 in 1970, while aluminum went from $522 to $633 (USGS copper statistics; USGS aluminum statistics). Copper cost 1.37 times as much as aluminum per ton in 1964, 2.02 times in 1970 and 2.25 times in 1973. US copper stocks fell from 1,200,000 metric tons in 1960 to 342,000 in 1969, a 71.5% drop.

Copper cost twice as much as aluminum by 1970

US unit value, dollars per metric ton, 1960 to 1979

Copper cost twice as much as aluminum by 1970Line chart of US copper and aluminum unit values, 1960 to 1979. Copper rose from $713 a ton in 1964 to $1,280 in 1970 while aluminum moved from $522 to $633; the copper to aluminum ratio went from 1.37 to 2.02.05001,0001,5002,0002,500$/t1960196219641966196819701972197419761979Copper $/tAluminum $/t

Source: USGS Data Series 140, copper and aluminum statistics

The window closed through product standards rather than a ban. NEMA (2012 white paper) dates the industry reevaluation program to 1970 and says that by mid-1972 only requalified aluminum conductors and CO/ALR wiring devices were acceptable under industry standards. IAEI (January/February 2006) says AA-8000 series alloy wire was listed and manufactured beginning in 1972. The National Electrical Code first named AA-8000 conductors specifically in its 1987 edition.

Branch circuit aluminum wiring: Solid aluminum conductors, sized No. 10 and No. 12 AWG, feeding outlets, switches and fixtures on 15 and 20 amp circuits. CPSC's repair guidance does not cover the larger aluminum service entrance, dryer and range cables, or copper-clad aluminum wire.

CPSC's 55-times finding covers outlets in homes built before 1972

The most cited federal number comes from a Franklin Research Institute survey done for CPSC. It measures outlet connections only, and it stops at 1972.

CPSC reports that the national Franklin Research Institute survey found homes built before 1972 and wired with aluminum were 55 times more likely than copper-wired homes to have one or more outlet connections reach Fire Hazard Conditions (CPSC Publication 516). The survey defined that condition as a receptacle cover plate screw reaching 149 degrees C (300 degrees F), sparks from the receptacle, or charring of nearby materials.

  • The survey covered wire connections at outlets only; CPSC notes that other aluminum connections and splices are also prone to fail.
  • CPSC says no information was developed for aluminum-wired homes built after 1972.
  • On April 28, 1974, two people died in a Hampton Bays, New York, house fire that fire officials traced to an overheating aluminum connection at a wall receptacle, according to CPSC.
  • CPSC says failing aluminum connections seldom give warning signs; the signs it lists are hot face plates, flickering lights, dead circuits and a burning plastic smell.

Laboratory work at the National Bureau of Standards (Journal of Research, 1980) explains the mechanism. In a loose connection, arcing at the iron screw and aluminum wire interface produced temperatures in excess of 1,500 degrees C and formed intermetallic compounds with high resistivity. A tight receptacle connection carrying 15 amps dissipates on the order of 80 milliwatts; a glowing connection has been reported at up to 36 watts.

15.8 million surviving homes date from the 1965 to 1973 window

Splitting the Census 2025 decade counts by the timing of regional housing starts puts 15.8 million homes, 10.7% of all US housing units, in the 1965 to 1973 build years. This is an era estimate, not a count of homes that have aluminum wiring.

The 2025 American Community Survey counts 14.0 million housing units built from 1960 to 1969 and 20.1 million built from 1970 to 1979 (ACS 2025 1-year, B25034). Census does not publish single years, so KBR weighted each decade by the share of that decade's private housing starts that fell inside the window, region by region (Census New Residential Construction). Nationally, 1965 to 1969 held 0.491 of 1960s starts and 1970 to 1973 held 0.446 of 1970s starts.

Share of housing built 1965 to 1973, by state

Estimated, percent of all housing units, 2025

Share of housing built 1965 to 1973, by stateUS tile map of the estimated share of housing built 1965 to 1973. Hawaii is highest at 14.6%, Louisiana and Oklahoma 13.34%, Nevada lowest at 6.53%; the US figure is 10.69%.AK: 12.3AK12.3ME: 9.84ME9.84VT: 10.8VT10.8NH: 10.8NH10.8WA: 9.14WA9.14ID: 8.46ID8.46MT: 9.12MT9.12ND: 10.3ND10.3MN: 10.3MN10.3IL: 11.7IL11.7WI: 10.8WI10.8MI: 12.1MI12.1NY: 10.5NY10.5RI: 12.2RI12.2MA: 9.98MA9.98OR: 10.4OR10.4NV: 6.53NV6.53WY: 11.0WY11.0SD: 9.45SD9.45IA: 10.4IA10.4IN: 10.5IN10.5OH: 11.6OH11.6PA: 10.8PA10.8NJ: 11.9NJ11.9CT: 12.7CT12.7CA: 11.8CA11.8UT: 7.66UT7.66CO: 9.2CO9.2NE: 10.9NE10.9MO: 11.3MO11.3KY: 12.1KY12.1WV: 12.0WV12.0VA: 11.5VA11.5MD: 12.0MD12.0DE: 9.41DE9.41AZ: 8.26AZ8.26NM: 10.5NM10.5KS: 10.6KS10.6AR: 11.9AR11.9TN: 11.2TN11.2NC: 9.18NC9.18SC: 9.33SC9.33DC: 6.92DC6.92OK: 13.3OK13.3LA: 13.3LA13.3MS: 12.7MS12.7AL: 12.0AL12.0GA: 8.89GA8.89HI: 14.6HI14.6TX: 9.34TX9.34FL: 10.7FL10.7PR6.53 to 9.189.18 to 10.310.3 to 10.810.8 to 11.611.6 to 12.112.1 to 14.6%

Source: KBR estimate from Census ACS 2025 1-year B25034 and Census regional housing starts

California has the most era homes, an estimated 1.8 million, followed by Texas (1.2 million), Florida (1.1 million), New York (917,223) and Illinois (643,887). Those five states hold 35.8% of the national estimate.

States with the most homes built 1965 to 1973

Estimated housing units, thousands, 2025

States with the most homes built 1965 to 1973Horizontal bars for the 12 states with the most homes built 1965 to 1973: California 1765.5 thousand, Texas 1199.6 thousand, Florida 1149.1 thousand, down to Georgia 420.8 thousand.thousandCalifornia1,766Texas1,200Florida1,149New York917Illinois644Pennsylvania632Ohio623Michigan568North Carolina474New Jersey456Virginia435Georgia421

Source: KBR estimate from Census ACS 2025 1-year B25034 and Census regional housing starts

Estimated homes built 1965 to 1973, by state, 2025 Download CSV
Show all 51 rows
StateCodeCensus regionBuilt 1960 to 1969 (ACS)Built 1970 to 1979 (ACS)Est. built 1965 to 1973MOE (90%)Share of housing (%)Rank by countRank by shareOwner-occupied est.
CaliforniaCAWest1812566243872217654841592611.77115878685
TexasTXSouth91665815541811199640157539.34240654661
FloridaFLSouth810653156311411490721442310.65327640775
New YorkNYNortheast10336738513819172231241110.5429478141
IllinoisILMidwest6125627746676438871128411.7516401952
PennsylvaniaPANortheast577678714468632322966110.75626384572
OhioOHMidwest6015577374936226841051211.6717377556
MichiganMIMidwest540267684413568381805912.1188361316
North CarolinaNCSouth39220258200947451087899.18943272417
New JerseyNJNortheast485150449829455695908911.911013274822
VirginiaVASouth361441531735435132840811.511118266148
GeorgiaGASouth33065453506742079083618.891246234728
TennesseeTNSouth310710442298367140896311.161320212401
MissouriMOMidwest302706396867324008655811.271419201726
IndianaINMidwest303971386131320227692610.491530203987
WashingtonWAWest28112247629131410572859.141644179561
MarylandMDSouth301068339180313974825012.011710177820
MassachusettsMANortheast29515833211230655576019.981836177153
WisconsinWIMidwest272817389823305332644210.761925183396
AlabamaALSouth248068343634288685706912.02011166664
LouisianaLASouth223884368430287783814713.34212164181
ArizonaAZWest20543746769427869162168.262248163599
MinnesotaMNMidwest226997358850268343611810.262335169012
KentuckyKYSouth204577309357250208611512.09249149478
ColoradoCOWest18988640801124761958819.22542150853
OklahomaOKSouth188862309884242339513413.34263132435
South CarolinaSCSouth18975430558124078966769.332741144621
ConnecticutCTNortheast203995202959198540557312.74284126466
OregonORWest159220318249197823529110.362933114480
MississippiMSSouth145458209943173222594412.65305103595
ArkansasARSouth130533220501170449529211.873114102342
IowaIAMidwest139028191856152781407810.41323299673
KansasKSMidwest118360185824139385377210.57332883151
West VirginiaWVSouth80312134323104243404611.96341264734
New MexicoNMWest82176165974102806388110.47353159693
UtahUTWest7013717180310013032857.66364963235
NebraskaNEMidwest9254311725797368313810.93372260345
NevadaNVWest659951524009041336236.53385145207
HawaiiHIWest7962412250683873309514.639144038
MaineMENortheast506921034377592433089.84403745317
IdahoIDWest458341278807184728668.46414745657
New HampshireNHNortheast505189480571512365410.8422444427
Rhode IslandRINortheast558236649059824344212.2343733822
MontanaMTWest38266816014964523289.12444530477
DelawareDESouth40655524324549629319.41453928534
South DakotaSDMidwest33119558194058624159.45463823546
AlaskaAKWest240157411440566210912.2747622177
North DakotaNDMidwest281486013839754207310.35483425364
VermontVTNortheast268754918437416211510.81492322994
WyomingWYWest205635499831258202511.02502119079
District of ColumbiaDCSouth31883197702570325176.9251506821

Era estimate, not homes with aluminum wiring. MOE covers ACS sampling error only. Estimate = 1960s weight x built 1960 to 1969 + 1970s weight x built 1970 to 1979, weights from regional private starts (table t2).

Source: [1][2][5] U.S. Census Bureau; U.S. Census Bureau; U.S. Census Bureau

Among owner-occupied homes, the estimate is 9.1 million, or 10.42% of owner-occupied units (ACS B25036). Of occupied homes built from 1960 to 1979, 68.0% are in one-unit structures and 4.42% are mobile homes, boats, RVs or vans (ACS B25127).

Hawaii, Louisiana and Oklahoma have the largest era shares; Nevada the smallest

Ranking by share rather than count moves smaller states to the top. Fast-growing Sun Belt and Mountain states sit at the bottom because most of their housing is newer.

An estimated 14.6% of Hawaii's housing units date from 1965 to 1973, the highest share of any state. Louisiana and Oklahoma follow at 13.34% each, then Connecticut at 12.74%. Nevada has the smallest share at 6.53%, behind the District of Columbia (6.92%) and Utah (7.66%).

Texas ranks second by count but 40th by share (9.34%), because so much of its housing was built after 1980. Michigan is the only state in the top 10 on both lists, with 568,381 era homes and a 12.11% share.

The window holds three of the four biggest years for US housing starts

The aluminum years were also boom years. Private starts reached a record 2.36 million in 1972, so the 1970s weight leans toward the window's end.

Census annual starts, a series that begins in 1959, peak at 2,357 thousand units in 1972. The next three years are 2005 (2,068 thousand), 1971 (2,052 thousand) and 1973 (2,045 thousand), so 3 of the four highest years fall inside the 1965 to 1973 window (Census starts by region). Private starts across the nine window years total 14,791 thousand units.

Housing starts peaked inside the aluminum window

US private housing starts, thousands, 1960 to 1979

Housing starts peaked inside the aluminum windowBar chart of US private housing starts 1960 to 1979 with 1965 to 1973 highlighted. Starts peaked at 2,356.6 thousand in 1972; the window years total 14,791 thousand.01,0002,0003,000thousand1,25219601,31319611,46319621,60319631,52919641,47319651,16519661,29219671,50819681,46719691,43419702,05219712,35719722,04519731,33819741,16019751,53819761,98719772,02019781,7451979

Source: Census Bureau, New Residential Construction, annual starts

Regional starts weights used to split the decades Download CSV
RegionStarts 1965 to 1969 (000)Starts 1960 to 1969 (000)1960s weightStarts 1970 to 1973 (000)Starts 1970 to 1979 (000)1970s weight1970s weight, completions
Northeast1124.52371.50.4741088.52169.90.5020.465
Midwest1704.23232.40.5271610.13886.50.4140.401
South2773.65370.90.5163436.77354.40.4670.438
West1301.23088.90.4211752.34265.10.4110.401
United States6903.714063.80.4917887.717675.80.4460.424

Private starts, thousands of units. Completions by region begin in 1968, so they serve only as a check on the 1970s weight.

Source: [5][6] U.S. Census Bureau; U.S. Census Bureau

The Northeast's 1970s weight (0.502) is the highest of the four regions because its building fell off after 1973; the Midwest's (0.414) is the lowest because its starts stayed strong through 1978.

CPSC accepts three permanent repairs and calls CO/ALR devices an incomplete fix

CPSC's 2011 guidance names one replacement method and two pigtail connectors as permanent. Twist-on pigtails and CO/ALR devices are, in CPSC staff's view, temporary at best.

The Commission voted unanimously, 5 to 0, on a ballot due March 21, 2011, to republish Publication 516 with explicit recognition that COPALUM and AlumiConn connectors were the only products meeting the agency's standards (CPSC Record of Commission Action). The publication sets three tests: a repair must be safe, effective and permanent.

Aluminum wiring repairs and what CPSC says about each Download CSV
MethodCPSC positionCPSC noteDate of guidance
Complete replacement with copper cablePermanent; CPSC calls it the best methodRemoves the aluminum wire as the cause; often impractical or prohibitively expensiveJune 2011
COPALUM crimp connector pigtailPermanent; recommendedPower tool, upwards of 10,000 pounds of force; manufacturer-trained electricians onlyJune 2011
AlumiConn setscrew connector pigtailPermanent; acceptable alternative where COPALUM is unavailablePerformed well in initial tests; too new for a long-term history as of 2011June 2011
Other (non-COPALUM) crimp connectorsRecommended againstNo other crimp connectors evaluated for copper to aluminumJune 2011
Twist-on connector pigtailsNot a permanent repair; emergency or temporary onlySubstantial numbers overheated severely in CPSC-sponsored testsJune 2011
CO/ALR switches and receptaclesIncomplete repair at best; emergency or temporary onlyFailed lab tests with typical installed aluminum wire; not made for all parts of the systemJune 2011

Paraphrased from CPSC Publication 516 (June 2011). CPSC says all repairs should be done by a qualified electrician and inspected under local rules.

Source: [7][8] U.S. Consumer Product Safety Commission; U.S. Consumer Product Safety Commission

CPSC calls full copper replacement the best method but says it is impractical or prohibitively expensive in many homes. COPALUM uses a dedicated power tool whose dies apply upwards of 10,000 pounds of force, and only manufacturer-trained electricians may install it. CPSC describes AlumiConn, a setscrew connector, as the next best alternative when COPALUM is not available.

Basement ceiling joists with sheathed electrical cable runs, where cable markings can be read
Illustrative photograph. Generated image, not a specific project.

Four of nine Maine insurer filings name aluminum wiring; Texas and Louisiana sale forms ask about it

Insurer rules range from outright ineligibility to acceptance with an electrician's certificate. Two of three state sale disclosure forms we checked name aluminum wiring.

Of nine homeowners underwriting guideline files posted by the Maine Bureau of Insurance, four name aluminum wiring (4 of 9 (44.4%)). Hanover (2018) and both Integon National files (2019; undated) list it as making a home ineligible. State Farm (effective 2023) excludes single strand aluminum wiring unless a licensed electrician certifies that every connection was repaired with methods approved by CPSC.

In Florida, the Citizens Property Insurance 4-point inspection form (Insp4pt 01 18) asks the inspector to flag branch circuit aluminum wiring and to say whether connections were repaired with a COPALUM crimp or AlumiConn, with remediation certified by a licensed electrician.

Insurer and home-sale disclosure positions on aluminum wiring Download CSV
BodyDocument typePositionDate
Citizens Property Insurance (FL)Insurer inspection formFlags branch circuit aluminum wiring; asks for COPALUM or AlumiConn repair records certified by an electricianForm 01 18
State Farm (ME filing)Insurer guidelineUnacceptable unless an electrician certifies all connections repaired by CPSC-approved methods2023-01-01
Hanover (ME filing)Insurer guidelineAluminum and knob and tube wiring listed as ineligible risks2018-12-03
Integon National OneChoice (ME)Insurer guidelineIneligible when knob and tube or aluminum wiring is present2019-04-25
Integon National OneChoice and Premier (ME)Insurer guidelineIneligible when knob and tube or aluminum wiring is presentUndated
Five other Maine filingsInsurer guidelineDo not name aluminum wiring2007 to 2023 editions
Texas Real Estate CommissionSeller disclosure formAluminum Wiring listed among conditions the seller must answer2026-05-28
Louisiana Real Estate CommissionSeller disclosure formQuestion 20c asks about any aluminum wiring in the structure2026-01
Washington (RCW 64.06.020)Statutory disclosure formAsks about electrical defects, including wiring; does not name aluminumCurrent

Maine files are insurer filings posted by the Maine Bureau of Insurance, read through Internet Archive captures; they may have been superseded.

Source: [12][13][14][15][16][17][18][19][20][21][22][23][24] Citizens Property Insurance Corporation (Florida); State Farm via Maine Bureau of Insurance (Internet Archive); Hanover Insurance Group via Maine Bureau of Insurance (Internet Archive); Integon National via Maine Bureau of Insurance (Internet Archive); Integon National via Maine Bureau of Insurance (Internet Archive); Farmers via Maine Bureau of Insurance (Internet Archive); Farmers via Maine Bureau of Insurance (Internet Archive); USAA via Maine Bureau of Insurance (Internet Archive); Chubb via Maine Bureau of Insurance (Internet Archive); Unnamed insurer via Maine Bureau of Insurance (Internet Archive); Texas Real Estate Commission; Louisiana Real Estate Commission; Washington State Legislature

Texas's seller's disclosure notice, effective May 28, 2026, lists Aluminum Wiring among the conditions a seller must say whether they are aware of (TREC No. 55-1). Louisiana's January 2026 property disclosure document asks: Are you aware of any aluminum wiring in the structure? (LREC). Washington's statutory form asks about defects in the electrical system, including wiring, without naming aluminum (RCW 64.06.020). Texas and Louisiana together hold an estimated 1,487,423 era homes.

Ending the window in 1972 or 1975 moves the count by 2.3 to 2.8 million homes

The weights matter less than the window. Swapping starts for completions changes the total by 2.8% and one national weight pair by 0.1%; ending the window in 1972 or 1975 changes it by 14.7% or 17.9%.

How the US era estimate changes with the method Download CSV
VariantEstimated homesShare of US housing (%)
Main estimate: 1965 to 1973, regional starts weights1584118210.69
1965 to 1973, one national weight pair1585200310.69
1965 to 1973, completions for the 1970s1539634910.39
1965 to 1973, mobile-home share removed1514055010.21
Narrower: 1965 to 1972135189289.12
Wider: 1965 to 19751868451212.61

All variants use ACS 2025 1-year decade counts for 50 states and DC.

Source: [1][3][5][6] U.S. Census Bureau; U.S. Census Bureau; U.S. Census Bureau; U.S. Census Bureau

The window drives the estimate more than the weights

Estimated US homes, millions, 2025

The window drives the estimate more than the weightsHorizontal bars comparing six versions of the estimate, from 13.52 million for 1965 to 1972 to 18.68 million for 1965 to 1975; the main estimate is 15.84 million.million1965 to 197213.5Mobile homes removed15.1Completions weight15.4Main estimate15.8National weights15.81965 to 197518.7

Source: KBR estimates from Census ACS 2025 1-year and Census starts and completions

The main estimate is 1.07 times the private starts recorded for 1965 to 1973. A ratio above 1 is a warning sign: the ACS counts mobile homes and public housing that private starts omit, and households tend to round year built to a decade. Removing the mobile-home share cuts the ratio to 1.02. Read 15.8 million as an upper-leaning era figure.

Dishwashers, light fixtures and junction boxes are on CPSC's repair list too

CPSC's repair scope reaches beyond outlets and switches to permanently connected appliances, which is where kitchen and bathroom projects meet the old wiring.

CPSC says every aluminum connection or splice should be repaired, including outlets, dimmers, switches, fixtures, appliances and junction boxes, and names dishwashers, heaters, air conditioners and light fixtures wired directly to No. 10 or No. 12 aluminum circuits. CPSC also says all modifications to installed wiring should be performed and inspected under local rules.

For a homeowner planning a remodel in a 1965 to 1973 house, those points mean the electrical scope and permit can affect schedule; our kitchen remodel timeline and guide to choosing a remodeling contractor cover how to plan those steps. Related old-house hazards are covered in our reports on knob and tube wiring, Federal Pacific panels, polybutylene pipe and Chinese drywall.

1970s bathroom with a vanity light fixture and wall switch
Illustrative photograph. Generated image, not a specific project.

Dated official positions on aluminum branch wiring

Checked at each report refresh (planned yearly with the ACS 1-year release). Last checked 2026-11-08. Entries are neutral records of public data; each links to its source record.

BodyPosition or actionDateEvidenceSource
U.S. Consumer Product Safety CommissionCommission votes 5 to 0 to republish Publication 516 naming COPALUM and AlumiConn as the only products meeting its standards2011-03-21agency recordRecord
U.S. Consumer Product Safety CommissionPublication 516 approves three permanent repairs: copper replacement, COPALUM, AlumiConn2011-06agency recordRecord
U.S. Consumer Product Safety CommissionPublication 516 rejects twist-on pigtails and CO/ALR devices as permanent repairs2011-06agency recordRecord
Citizens Property Insurance Corporation4-point form asks for aluminum branch wiring and COPALUM or AlumiConn remediation recordsForm 01 18own statementRecord
State Farm (Maine filing)Single strand aluminum wiring unacceptable unless repaired by CPSC-approved methods and certified2023-01-01own statementRecord
Hanover (Maine filing)Aluminum wiring listed among home ineligible risks2018-12-03own statementRecord
Integon National (Maine filing)Homes with aluminum wiring present are ineligible2019-04-25own statementRecord
Integon National, Premier Client (Maine filing)Homes with aluminum wiring present are ineligibleUndatedown statementRecord
Texas Real Estate CommissionSeller's Disclosure Notice 55-1 lists Aluminum Wiring2026-05-28agency recordRecord
Louisiana Real Estate CommissionProperty Disclosure Document question 20c asks about aluminum wiring2026-01agency recordRecord

State-by-state findings

  1. An estimated 15.8 million US housing units built 1965 to 1973 were standing in 2025, 10.7% of 148.2 million units.[1][5]
  2. Owner-occupied era homes number an estimated 9.1 million, 10.42% of US owner-occupied units in 2025.[2][5]
  3. California leads by count with an estimated 1,765,484 era homes in 2025, followed by Texas (1,199,640) and Florida (1,149,072).[1][5]
  4. Hawaii has the highest era share in 2025 at 14.6%; Louisiana and Oklahoma follow at 13.34%.[1][5]
  5. Nevada has the lowest era share in 2025 at 6.53%, then DC (6.92%) and Utah (7.66%).[1][5]
  6. Five states, California, Texas, Florida, New York and Illinois, hold 35.8% of the US era estimate.[1][5]
  7. US private housing starts hit a record 2,356.6 thousand in 1972; 3 of the 4 highest years since 1959 fall in 1965 to 1973.[5]
  8. CPSC: homes built before 1972 with aluminum wiring were 55 times more likely to have outlet connections reach Fire Hazard Conditions than copper-wired homes.[7]
  9. CPSC defines Fire Hazard Conditions as a cover plate screw at 149 degrees C (300 degrees F), sparks, or charring.[7]
  10. National Bureau of Standards tests in 1980 found arcing temperatures above 1,500 degrees C at loose iron screw and aluminum wire interfaces.[9]
  11. The CPSC Commission voted 5 to 0 in March 2011 to republish Publication 516 recognizing only COPALUM and AlumiConn connectors.[8]
  12. US copper unit value rose 79.5% from 1964 to 1970, while US copper stocks fell 71.5% from 1960 to 1969.[10]
  13. State Farm's 2023 Maine guidelines accept solid aluminum wiring only with an electrician's certificate of CPSC-approved repairs.[13]
  14. Texas (May 2026) and Louisiana (January 2026) seller disclosure forms ask about aluminum wiring by name; Washington's does not.[22][23][24]

Rankings and ratios we derived

Homes built 1965 to 1973, by state (signature estimate)

Formulaera[state] = w60[region] x B25034 built 1960 to 1969 + w70[region] x B25034 built 1970 to 1979; w60 = private starts 1965 to 1969 / starts 1960 to 1969; w70 = starts 1970 to 1973 / starts 1970 to 1979; US = sum of 50 states and DC

Inputs: fact rows 2, 3, 9 to 13; tables t1 and t2 (fact sheet rows)

Result: 15,841,182 homes (10.69% of US housing units); MOE about 43,352 from ACS sampling

The number of homes that date from the years CPSC ties to aluminum branch wiring. It sizes exposure to the era, which is the most a public dataset can show.

Limitations: Not homes with aluminum wiring; no federal survey asks about wire metal. Assumes surviving homes are spread within each decade like regional starts were. Hawaii and Alaska get West region weights.

State share ranking

Formulashare[state] = era[state] / B25034 total units; ranked 1 to 51

Inputs: table t1 (fact sheet rows)

Result: Highest Hawaii 14.6%, lowest Nevada 6.53%

Shares show where era homes make up more of the local stock, which matters for local inspectors and insurers.

Limitations: State margins of error are small relative to the method uncertainty in table t6.

Copper to aluminum price ratio

FormulaUSGS copper unit value / USGS aluminum unit value, by year

Inputs: fact rows 38 to 47; table t5 (fact sheet rows)

Result: 1.37 in 1964, 2.02 in 1970, 2.25 in 1973

The widening gap matches CPSC's account of a mid 1960s copper shortage driving the switch.

Limitations: Unit values of metal, not wire or installed cost.

Check against private starts

Formulad1 / starts 1965 to 1973; repeated after removing the mobile-home share of occupied 1960 to 1979 homes

Inputs: derived d1, d10, d13 (fact sheet rows)

Result: 1.07 (all units), 1.02 (mobile homes removed)

Survivors cannot exceed homes built, so a ratio above 1 shows the estimate leans high.

Limitations: Starts exclude public housing; ACS year built is self-reported.

Sensitivity to window and weights

FormulaRecompute d1 with completions weights, one national weight pair, 1965 to 1972 and 1965 to 1975 windows

Inputs: table t6 (fact sheet rows)

Result: 13.5 million to 18.7 million

Where the window ends matters far more than how the decades are split.

Limitations: CPSC itself gives two bounds: before 1972 for its survey, and the mid 1970s for installation.

Download the calculations (CSV)

Executive summary

  • KBR estimates 15.8 million US housing units standing in 2025 were built from 1965 to 1973, 10.7% of the stock; the figure marks the aluminum wiring era, not homes confirmed to have it.
  • California has the most era homes (1.8 million); Hawaii has the highest share (14.6%) and Nevada the lowest (6.53%).
  • CPSC reports that pre-1972 aluminum-wired homes were 55 times more likely than copper-wired homes to have outlet connections reach Fire Hazard Conditions.
  • CPSC accepts three permanent repairs: copper rewiring, COPALUM crimps and AlumiConn connectors; it treats twist-on pigtails and CO/ALR devices as temporary.
  • Copper cost 1.37 times as much as aluminum per ton in 1964 and 2.02 times in 1970, per USGS unit values.
  • Four of nine Maine insurer guideline files name aluminum wiring; Texas and Louisiana seller disclosure forms ask about it by name.
  • Ending the window in 1972 or 1975 instead of 1973 moves the estimate to 13.5 million or 18.7 million.

Questions people ask

Is aluminum wiring dangerous?

CPSC reports that pre-1972 aluminum-wired homes were 55 times more likely than copper-wired homes to have at least one outlet connection reach Fire Hazard Conditions, and it links an April 1974 house fire that killed two people to an overheating aluminum connection. The risk sits at connections and splices, not along the wire.

How do I know if my house has aluminum wiring?

CPSC says to look at the cable jacket where it is visible in an unfinished basement, attic or garage for the marking Al or Aluminum; Cu-clad or Copper-clad marks copper-coated aluminum, which its repair guidance does not cover. Homes built before 1965 are unlikely to have it. If the marking cannot be read, CPSC says to have a qualified electrician check.

Can you get insurance with aluminum wiring?

Practices differ by insurer. Four of nine Maine guideline files name aluminum wiring: Hanover and two Integon National files list it as ineligible, while State Farm accepts it with an electrician's certificate of CPSC-approved repairs. Florida's Citizens form asks for COPALUM or AlumiConn repair records.

What does pigtailing cost?

We found no government or other primary source that publishes a price for pigtailing aluminum wiring, so we report none. CPSC says only that copper rewiring is often prohibitively expensive and that twist-on and CO/ALR fixes are favored by some electricians because they cost substantially less than COPALUM.

When did they stop using aluminum wiring?

There was no single end date. NEMA says that by mid-1972 only requalified aluminum conductors and CO/ALR devices met industry standards, and CPSC says cables installed through the mid 1970s may contain aluminum. The NEC first named AA-8000 alloy conductors in its 1987 edition.

Download the data

Every table in this report is available as a CSV under CC BY 4.0. The fact sheet lists each value with its source URL and access date.

For journalists and researchers

If you cite only a few, cite these

  1. 15.8 million US homes date from the 1965 to 1973 aluminum wiring era (KBR estimate, ACS 2025).[1][5]
  2. CPSC: 55 times more likely to reach Fire Hazard Conditions at outlets, pre-1972 aluminum vs copper.[7]
  3. California holds the most era homes (1.8 million); Hawaii the highest share (14.6%).[1][5]

Most quotable statistics

  • An estimated 15.8 million US homes standing in 2025 were built from 1965 to 1973, the aluminum branch wiring era (10.7% of housing units).[1][5]
  • Pre-1972 aluminum-wired homes were 55 times more likely than copper-wired homes to have outlet connections reach Fire Hazard Conditions, per a CPSC-sponsored survey.[7]
  • Hawaii has the highest share of housing from the aluminum wiring years, an estimated 14.6% in 2025; Nevada has the lowest, 6.53%.[1][5]
  • CPSC recognizes only copper rewiring, COPALUM crimps and AlumiConn connectors as permanent aluminum wiring repairs.[7][8]
  • Copper cost 2.02 times as much as aluminum per ton in 1970, up from 1.37 in 1964, according to USGS unit values.[10][11]
  • Four of nine homeowners guideline files filed in Maine name aluminum wiring; three make such homes ineligible.[13][14][15][16]

Press summary

Kitchen and Bath Renovators estimates that 15.8 million US homes standing in 2025 were built from 1965 to 1973, the years when builders wired outlets and switches with solid aluminum during a copper shortage. That is 10.7% of the nation's 148.2 million housing units, according to an analysis of Census American Community Survey 2025 data weighted by regional housing starts. California has the most era homes, about 1.8 million, and Hawaii the highest share, 14.6%. The estimate counts homes from the era, not homes confirmed to have aluminum wiring. The U.S. Consumer Product Safety Commission reports that pre-1972 aluminum-wired homes were 55 times more likely than copper-wired homes to have outlet connections reach fire hazard conditions, and it accepts only three permanent repairs: copper rewiring, COPALUM crimps and AlumiConn connectors. Four of nine insurer guideline files filed in Maine name aluminum wiring, and Texas and Louisiana seller disclosure forms ask about it.

Suggested headlines

  • 15.8 million US homes date from the aluminum wiring years
  • Hawaii, Louisiana and Oklahoma lead in homes from the aluminum wiring era
  • CPSC still recognizes only three permanent fixes for aluminum wiring
  • Copper cost 2.02 times as much as aluminum when builders switched wire
  • Texas and Louisiana sale forms ask about aluminum wiring; Washington's does not

How to cite this report

Kitchen and Bath Renovators. (2026). Aluminum Wiring: The 1965 to 1973 Homes, State by State. Retrieved from https://kitchenandbathrenovators.com/research/aluminum-wiring/

Reuse license

Data and tables are licensed CC BY 4.0. Attribution: “Source: Kitchen and Bath Renovators, Aluminum Wiring: The 1965 to 1973 Homes, State by State” with a link to this page.

Frequently asked questions

How many US homes were built during the aluminum wiring years?

KBR estimates 15.8 million homes standing in 2025 were built from 1965 to 1973, 10.7% of US housing units, from ACS 2025 1-year data and Census housing starts.

Which state has the most homes from that era?

California, with an estimated 1,765,484 homes built 1965 to 1973, followed by Texas with 1,199,640.

Which state has the highest share of era homes?

Hawaii, at an estimated 14.6% of its housing units in 2025. Nevada has the lowest share at 6.53%.

What did the Franklin Research Institute study find?

In a national survey done for CPSC, homes built before 1972 and wired with aluminum were 55 times more likely than copper-wired homes to have one or more outlet connections reach Fire Hazard Conditions.

What counts as a Fire Hazard Condition in that study?

A receptacle cover plate screw reaching 149 degrees C (300 degrees F), sparks emitted from the receptacle, or charred material around it, per CPSC Publication 516.

Which aluminum wiring repairs does CPSC accept as permanent?

Three: complete replacement with copper, pigtailing with COPALUM crimp connectors, and pigtailing with AlumiConn connectors where COPALUM is unavailable.

Are CO/ALR outlets enough?

CPSC staff call CO/ALR devices, at best, an incomplete repair, because they failed lab tests with typical installed aluminum wire and are not made for every part of the system.

Are purple twist-on connectors a permanent fix?

CPSC does not treat any twist-on connector pigtail as a permanent repair; it says substantial numbers of twist-on connectors overheated severely in CPSC-sponsored tests and allows them only as an emergency, temporary repair.

Why did builders use aluminum wire?

CPSC cites a copper shortage in the mid 1960s. USGS data show copper cost 1.37 times as much as aluminum per ton in 1964 and 2.02 times in 1970.

Do home sellers have to disclose aluminum wiring?

It depends on the state. Texas's TREC 55-1 notice and Louisiana's 2026 property disclosure document name aluminum wiring; Washington's statutory form asks only about electrical defects. This is not legal advice.

Reproduce this analysis

Every figure comes from the files below. The scripts that pulled and computed them are kept with the report and can be re-run.

DatasetPublisherSourceQuery or filterRows usedRetrieved
ACS 2025 1-year table-based Summary File, B25034, B25036U.S. Census BureauFile or endpointShared copy read in place at .tmp/datasets/acs/2025_1yr/; GEO_ID 0100000US and 0400000US (SUMLEVEL 040, COMPONENT 00 via Geos20251YR.txt), Puerto Rico dropped; B25034_E001, E007, E008 and MOEs; B25036_E002, E008, E00952 rows (US, 50 states, DC)2026-11-08
ACS 2025 1-year table-based Summary File, B25127U.S. Census BureauFile or endpointLines 024, 025, 030 (owner) and 067, 068, 073 (renter): built 1960 to 1979 total, one-unit, mobile homeUS row used; 50 of 51 state rows present (Wyoming not published)2026-11-08
New Residential Construction, annual housing units started by regionU.S. Census BureauFile or endpointSheet Annual; Total columns for US, Northeast, Midwest, South, West; 1960 to 1979 for weights, 1959 to 2025 for ranks20 years x 5 geographies for weights; 67 annual US rows for ranking2026-11-08
New Residential Construction, annual housing units completed by regionU.S. Census BureauFile or endpointSheet Annual; Total columns; 1970 to 197910 years x 5 geographies2026-11-08
Historical Statistics for Mineral and Material Commodities, copper and aluminum (Data Series 140)U.S. Geological SurveyFile or endpointUnit value ($/t) and stocks columns, 1960 to 1979; aluminum file ds140-aluminum-2021.xlsx unit value column20 years per metal2026-11-08
Maine homeowners underwriting guidelines, nine insurer files (Internet Archive captures of maine.gov)Maine Bureau of Insurance via Internet ArchiveFile or endpointFull text extracted with pdftotext and searched for 'aluminum'; other eight file URLs are sources s14 to s219 files; 4 with an aluminum wiring rule2026-11-08

Data quality and exclusions

  • Puerto Rico removed from the ACS state rows (1 row); the analysis covers 50 states and DC (51 rows).
  • Wyoming has no 2025 1-year B25127 row, so state-level mobile-home adjustments were not used; the national adjustment uses the US row only.
  • Census completions by region start in 1968; they were used only to test the 1970s weight (table t6), not for the 1960s.
  • Two copies of CPSC Publication 516 were opened (cpsc.gov/s3fs-public/516.pdf and /pdfs/516.pdf); their text matched apart from hyphenation, and the first is cited.
  • One unsourced per-device COPALUM price on a home inspection page was dropped because it named no source (see excluded.md).

Methodology

Source selection: federal agencies first (Census, CPSC, National Bureau of Standards, USGS), then state agency forms and insurer filings, then two trade bodies (IAEI, NEMA) for product standard history. Commercial blogs and contractor pages were read only as pages to beat.

Era estimate: ACS 2025 1-year table B25034 gives housing units by decade built for 50 states and DC. Each state's 1960s count was multiplied by its Census region's share of 1960s private starts that fell in 1965 to 1969, and its 1970s count by the share of 1970s starts in 1970 to 1973. Starts were used because Census completions by region begin only in 1968.

Owner-occupied and structure-type figures use B25036 and B25127 from the same release. B25127 is not published for Wyoming in the 2025 1-year file, so structure shares are used only at the national level.

Conflicts: CPSC gives two bounds, before 1972 for its survey and the mid 1970s for installation; the brief's 1965 to 1973 window sits between them, and table t6 shows the 1965 to 1972 and 1965 to 1975 alternatives. Insurer files were coded once each by searching the full text for 'aluminum'.

Limitations: no federal survey asks what metal a home's wiring is, so no state count of aluminum-wired homes exists. ACS year built is self-reported. Maine insurer files are dated filings that may have been replaced.

Last updated 2026-11-08. ACS 2025 1-year data were released 2026-10-29.

This report presents published data with its limitations. It is not legal, financial or investment advice.

Sources, ranked by quality

Tier 1: primary and official sources (24)

Tier 2: trade bodies, market research, company data (2)

Budget planner